Setting the XModem Parameters

The following parameters can be set:

Timeout after

~
sets the maximum time XModem waits for a character to be received from the serial port.

Maximum number of errors

~
sets the maximum number of errors before the file transfer is aborted.

Accept ASCII NUL

~
allows you to use XModem for none binary file transfers, when ASCII <#3674#>NUL<#3674#> is used as padding character.

Packet size

~
chooses the packet size for XModem transfers, the 1kB size may be more efficient on noise free lines.

Error check type

~
sets the default checksum type, if possible use the CRC check for the larger packet size.